This is a stand for a Plumbus. Inspiration and idea from 3dprintguy's stand at:
https://www.shapeways.com/product/HC3GTU3S2/rick-and-morty-plumbus-stand
Notice that i've changed the design a bit (not so round on the back). I've also added a bit of height via a sphere where all connections come together. This, and the added 4mm hole, is for a name-plate to be mounted (coming soon).
The plumbus model depicted in the picture is from:
http://www.thingiverse.com/thing:2088693
Note: The plumbus model is huge-so i did a basic scale to where i thought looked good. Turned out to be, 62mm circular portion (which rests upon the stand). So if you scale your own plumbus keep that in mind when dealing with this stand.
Finally, i've attached an entire model plus a bottom/top version which should help folks with smaller build heights.