Clik here to view.
Anet A8 Fan Shroud for Power Supply
This is a cooling fan shroud for the Anet A8 power supply. It was designed to fit the 20 Amp version, which is 110mm wide and 50mm thick. This shroud provides two air flow paths, through the case as...
View ArticleClik here to view.
Loggerhead Sea Turtle (poseable)
A model loggerhead turtle with moveable flippers. You could call it an "action figure", but there's a distinct absence of mutation and/or martial arts training for this little guy! All four flippers...
View ArticleClik here to view.
Micro SD Card Holder
This is a small box to store up to 18 Micro SD Cards. I always lost them - as they are so small - and therefore decided to design this Box.
View ArticleClik here to view.
Servo Switch Plate Mount
This is a simple servo mount that you can attach to a standard switch plate. Connect the servo to a microcontroller for a quick home automation project. ///////What You Need: -Micro sized servo (I used...
View ArticleClik here to view.
Clik here to view.
PacMan Ghost Screwdriver Holder
Keep your small screwdrivers organised with this holder. Or just use it as a paperweight or ornament - you decide. Holes are 4mm in diameter and 30mm deep and are suitable for small precision...
View ArticleClik here to view.
easter egg
an easter-egg shaped container with print in place joints and latch heavily inspired by Shiras beauitful easter egg, but without the need for supports and a paint-friendly smooth surface happy painting...
View ArticleClik here to view.
Simple Smooth Spool Holder
Pending Update!!! 2017/02/01: I've been meaning to do this for a while, but I've had a lot of projects going on, as part of my return to actively designing for Thingiverse, I'm going to update my first...
View ArticleClik here to view.
Micro Single Spinner Fidget by TimBolton
My kids had a hard time using my full size spinners so I designed this to fit smaller hands. I didn't expect it to spin all that good but I was surprised. It spins great and feels very good in your...
View ArticleClik here to view.
Octocat
Octocat is watching you check in your source code. Based on the popularity of the octopus model here on Thingiverse and the popularity of GitHub among programmers, I figured I would try making a creepy...
View ArticleClik here to view.
Modular Mounting System
This project is a mounting system for phones and small cameras. DESIGN CONSIDERATIONS: It is designed to be modular to privide flexibility of use. The system has potential to mount most phones and...
View ArticleClik here to view.
Gears of War - Augustus Cole Scan
I found this on Sketchfab it was made by Igor Bezrodny. You can find it at: https://sketchfab.com/models/ac019eb8c0014fdc9cc648d008ccab04# Very cool Note: OBJ file
View ArticleClik here to view.
Yet Another Micro SD Card Storage Case
Yet another Micro SD card storage case. I tried printing some of the other similar designs but had trouble with tolerances so I redesigned this from scratch in order to improve the fit fr my Samsung...
View ArticleClik here to view.
Raspberry Pi case (model B+ / 2 / 3)
This is my Raspberry Pi case, I have made several version for more design :) If you have improvement ideas, leave a comment please :)
View ArticleClik here to view.
Anet A8 Improved X-belt Tensioner
This x-belt tensioner works with the original right side bearing block that came with the printer, so you do not need to print a new one. It also tightens against the x-axis rods instead of the right...
View ArticleClik here to view.
Gate Holder for Arkham/Eldritch Horror
This is a remix from McMuffin77 excellent Arkham Horror Portal. I found his model pleasing to the eye, but way to much for the capabilities of my printer I used his tentacles and resized them to be...
View ArticleClik here to view.
Anet A8 Spool holder - reuse Anet parts
I want a spool holder for my Anet A8 printer with the goal, to reuse the threaded rod and the 4 nuts from the original spool holder. Make sure, that the length between display backcover and frontpanel...
View ArticleClik here to view.
Anet A8 v2 Button Trim
I got a new A8 that has tighter clearance around the buttons. The old button trim was too large and since the buttons taper, I can't get any clearance at the back of the Button faceplate. So, I made a...
View ArticleClik here to view.
tool set holder for Anet A8
tool set holder for Anet A8 printer. adjusted from http://www.thingiverse.com/thing:1515765 to fit Anet A8 frame without modification. mount it to the right side of the 5 buttons, remove 2 screws that...
View ArticleClik here to view.
Anet A8 Front Frame Brace
This frame brace is intended for mounting at the front of an Anet A8 3D printer. I made it because it compliments the design of my rear brace (http://www.thingiverse.com/thing:1852358). NOTE: The front...
View Article