Clik here to view.
2020 LED strip clip
A clip that fits into the 2020extrusion to hold 2 rows of 8mm LED light Strips that you can buy by the meter from places like HobbyKing, etc. Use to light your 3D printer! Set to shine 30 degrees from...
View ArticleClik here to view.
Raspberry Pi 3, Pi 2, and Model B+ case with VESA mounts and more
Compatibility (PLEASE READ INSTRUCTIONS AT BOTTOM) Works with the following Raspberry Pi Models: Raspberry Pi 3 (UPDATED 9/10/16) Raspberry Pi 2 Raspberry Pi Model B+ Details This Raspberry Pi case...
View ArticleClik here to view.
Elliptical Gear with no center pivot
A slight remix of PerryT's wonderful Elliptical Gear set. I liked playing around with the gears connected at the off-center pivots, and thought it would look cool to remove the center ring entirely....
View ArticleClik here to view.
Flashforge Creator Pro 2016 Filament Feeder
This is a quick remix of the filament feeder for the Flashforge Creator Pro 2016 by Vexelius so it can be printed entirely without supports.
View ArticleClik here to view.
Cubone Pokemon Skull Keychain
Added a keyring to Bluebie's design. ! Not available for commercial use ! Also found a way to print without support (see fotos)
View ArticleClik here to view.
RF Explorer Stand
Stand for the RF Explorer line of spectrum analyzers and signal generators. http://micro.arocholl.com
View ArticleClik here to view.
Swiss Army - Keys
This is a key organizer. It's simple to print and assembly. I printed with 0.2mm layer height, PLA or ABS, whatever. You will need: (2) 5mm allen screw with countersunk head (2) 5mm nyloc nut. Use the...
View ArticleClik here to view.
Clik here to view.
Mini caballete easel - prints in one piece
Cute little stand for photos, phone stand or displaying really small paintings! Prints in one piece. Break off built in supports. No software slicer rafts or supports needed. Print at 0.3mm resolution...
View ArticleClik here to view.
goku thumbs up key chain
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5sgk8s3eRYR
View ArticleClik here to view.
Small spool
I was having trouble with a some 200g filament I ordered for $5. The spool it shipped on was too flimsy to print from. I didn't want to re-spool each role of 200g so I designed a spool to fit over...
View ArticleClik here to view.
Simple Bookend
A very simple bookend - printing as I type this (ABS). I tend to print with objets at -0.07 (z) to prevent the need for a raft - so far has worked well. I'm using helper discs on the corners of this to...
View ArticleClik here to view.
Anet A8 bed level test
Use this to set up your bed leveling correct. On the photo you can see, in the front right corner it is too far away, and in the front left too near. Print this, adjust your bed screws and then print...
View ArticleClik here to view.
AR-15 vertical wall storage mount
This is a printable mount for storing your AR vertically on a wall by the mag well. It is designed to angle the muzzle toward the wall but will allow rifles with up to 20" barrels to clear that surface...
View ArticleClik here to view.
Batman Foosball Player
Batman Foosball table player, Only compatible for a central player location like goalie or mid player. print sideways and solid for good strength! Thank!
View ArticleClik here to view.
E3D Titan Extruder Fan Mount for Prusa i3
This is a quick remix of the E3D Titan fan holder by Gyrobot (original design). I loved the rear mount design that allowed easy access to the nozzle. However by having the fan rear mounted I was...
View ArticleClik here to view.
MPSM Extruder Arm v1
This is a upgrade to the stock extruder arm of the MP Select Mini 3D Printer. Watch the detailed installation guide on YouTube. enables better support for printing flexible materials adds overall...
View ArticleClik here to view.
Nut driver handle
Handle for a 1/4" nut driver. I purchased a set of security bits that had the 1/4" socket but no handle. Knocked this out in about 5 minutes with a couple of boolean objects in my 3D application....
View ArticleClik here to view.
G Watch R Charging Dock - Version 2
This stand covers the original G Watch R charging cradle LG SDT-330. It was made with Tinkercad and is an improved version of my previous design: http://www.thingiverse.com/thing:619842 Features: The...
View ArticleClik here to view.
Star Trek 2009 Enterprise
This is the Enterprise from the 2009 Star Trek movie. It's as close to the movie model as my SolidWorks skills allowed. UPDATE: I modified the file a bit to thicken the interface between the nacelle...
View Article