Clik here to view.
1405 JONBOT print bed ends reenforced Widened rods
I modified this way back, adding some extra strength to the part and leveling out the area that mates to the bed. If you have been using this setup this is a great way to add some stability. The rods...
View ArticleClik here to view.
Increased Rod Spacing For The Fully Printable Printrbot Simple 1405
Jon's Fully Printable Printrbot Simple 1405 is awesome, however some Printrbottalk users wanted wider rod spacing. This is what I came up with. It incorporates the 1405 belt ends (front feet) into a...
View ArticleClik here to view.
Pokemon GO Plus Mount
Designed to be adapter to any application. I made this for a watch.
View ArticleClik here to view.
Print-in-Place Folding Nintendo Switch Stand
Stand your Switch at a comfortable 45° angle (vs the built-in kickstand's 70°) Charge your Switch while playing Folds flat when not in use (120 x 50 x 7 mm) Great for travel, fits in your pocket or...
View ArticleClik here to view.
1405 Simple Printed Frame
This is an augmentation of my Printrbot Simple 1405 Expanded X thing http://www.thingiverse.com/thing:383713 to allow you to completely print a frame, no laser cut plywood here. Marked as a work in...
View ArticleClik here to view.
Colonial Marines Motion Tracker M314 (Aliens) Ripley, Hicks
This is a replica of the Motion tracker used by the Colonial Marines and Ripley in the film Aliens. It's full sized and is designed to be used as a cosplay or display item. I have included a PDF...
View ArticleClik here to view.
Star Wars LPA NN-14 Rey's Blaster Pistol w/ Compartment for Electronics
This is my model of the blaster that Han Solo gives Rey in Star Wars: The Force Awakens. As soon as I saw this blaster I knew I needed it so I immediately learned blender and made it. This is my first...
View ArticleClik here to view.
MPSM Extruder Arm v1
This is a upgrade to the stock extruder arm of the MP Select Mini 3D Printer. Watch the detailed installation guide on YouTube. enables better support for printing flexible materials adds overall...
View ArticleClik here to view.
Silica Desiccant Absorber Box
Just a simple box with a bunch of cutouts to allow for moisture to be absorbed without allowing for the silica desiccant to able to fall out through the holes. In my initial print, i found that the lid...
View ArticleClik here to view.
Fidget Star
Open, close, repeat. One way it's a box and the other way it's a star. Then a box. Then a star. Repeat the repeat. This hinged print-in-place model is a remix of the Fidget Cube. It 3D prints fully...
View ArticleClik here to view.
Bender Bust
Just the head of bender. I designed it for 0% infill and vapor polishing. It does have some holes off the printer that I fix post with ABS/acetone and follow with a vapor polish. This makes a very...
View ArticleClik here to view.
Raptor Reloaded by e-NABLE
The Raptor Reloaded is an updated release of the original that incorporates feedback from the e-NABLE community and has CAD design source files available in STEP, IGES, IPT, and F3D formats. Updates in...
View ArticleClik here to view.
Jean Gordon's carvings Owl on Stump
This is a 3D scan of a wooden carving made by my late mother. Scanned with an Einscans S (Scanmaster Plus) scanner. Sliced with Simplify 3D. Printed in PLA on a Prusa Original i3 Mk2.
View ArticleClik here to view.
1:10 Jeep Beadlock Rim
This is a 3-piece rim that I designed for my 1:10 MB jeep project, I decided to upload it separately since it can be used on any crawler. The tyres in the photo are these, but the rims should work with...
View ArticleClik here to view.
Round Tool Holder for 2020 Frame
This is minimalist, clean looking, tools holder for alumunium frame 2020. Diameter 30 mm Wall 0.8 mm Height 60 mm and 100 mm You can scale down Z to 40 mm if you like. If less then 40 mm, then the...
View ArticleClik here to view.
Wanhao i3 V2 Ultimate Glass Bed Holder
I got tired of trying the other glass bed holders that encapsulate the adjustment screws. All the corner ones I tried would just flex and actually cause the glass to bend up. This version is fully...
View ArticleClik here to view.
Apple Watch Stand
This is a remix of Masto's Apple Watch Dock. I've added a small hole to allow you to remove the charging cable by using a small pin. Ive also made some slight changes to the bottom in order to make...
View ArticleClik here to view.
The Triplex - Fidget Spinner
Just Launched the Five Dollar Fidget Spinner Kickstarter! Check it out here! https://www.kickstarter.com/projects/idlehandsdev/five-dollar-fidget-spinner This takes standard skateboard bearings, 22mm...
View ArticleClik here to view.
Tardis Light Switch Cover
The Dr Who Tardis design from Joe_Snuffy placed on a Decor Light Switch cover. This cover would replace the existing light switch cover.
View ArticleClik here to view.
Mixer Mover
This "wheelbarrow" for a heavy stand mixer allows you to easily move the mixer under the counter or into a corner. It can be printed in a color to blend (or contrast) with the mixer.
View Article