Quantcast
Channel: Thingiverse - Newest Instances
Viewing all 135766 articles
Browse latest View live
↧

Heat Set Insert Press

May 7, 2019, 6:54 pm
$
0
0

In this project we're building a rig for installing heat set inserts. Use 3D printed parts and hardware to build a solder rig with smooth linear roller action! Make perfectly straight inserts with precision using a tip for installing inserts.

Learn guide: https://learn.adafruit.com/heat-set-rig/
Project video https://youtu.be/bbsD-3_AP_0
3D Hangouts https://youtu.be/AJ9JT_pHqAw
Layer by Layer https://youtu.be/Yrz57TUeFzI

When working with 3D printed parts, a press can help you install inserts. This holds a soldering iron vertically and allows you to press down, perfectly straight. The tip of the iron heats up the brass and softens the plastic. Pressing down pushes the insert into the part and once it cools down, it’s locked in place. This could be handy for folks doing a small production run or if you're looking for a tool to make this easier.

This rig makes installing inserts feel like pressing a hot knife through butter – The linear motion on this build feels smooth. This is definitely over engineered and we spent way too much time on it but we think folks will find it useful. The rig is modular and uses common hardware – The 3d printed parts can be remixed and modified to work with other components. There’s a learn guide for this project so folks can build their own.

Holding the iron straight seems simple enough and works fine most of the time but the conical shape of a regular soldering iron tip can catch the insert and accidentally pull it out while melting the plastic – And that can sometimes ruin parts.

Soldering Iron 60W
https://www.adafruit.com/product/3685

Heat-Set Installation Tips
https://www.adafruit.com/product/4239

2020 Aluminum Extrusion
https://www.adafruit.com/product/1221

M4 button head screws
https://www.adafruit.com/product/1160

M4 Slim T-Nuts
https://www.adafruit.com/product/1157

Stickvise PCB vise
https://www.adafruit.com/product/3197

Soldering Tips for Heat Set Inserts
https://www.adafruit.com/product/4239

Inventor II 3D Printer
https://www.adafruit.com/product/3897

Filament for 3D Printers
https://www.adafruit.com/product/2080

↧
Search

COS - the Container Ship

September 1, 2018, 12:20 pm
$
0
0

A container or cargo ship belongs to every bath tub fleet. I once drew a small and a particularly large version. The swimming characteristics are still very good even when fully loaded.

Have fun printing :)

Even if my boats are not benchmarks (benchy), you can use them for quality control.

---Have a look at EMMA, the big sister of COS---

image

See what might come next

Instagram: https://www.instagram.com/vandragon_de

Support me :)

Although it is a lot of fun to draw boats and bring them to life, it takes a lot of time to research and draw. Especially the 1:1000 scale models are very time-consuming. So I wanted to see if there are any dear enthusiasts among you who appreciate my work and support me a little bit. Thank you for your help :)

imageimage

↧
↧

1/3 Scale Jack Stand

February 15, 2016, 1:09 pm
$
0
0

Here is a jack stand to go with my other models.

Requires a m3 x 25mm SHCS and m3 Lock nut.
Jack stand tooth and jack stand lever should be a tight fit onto the screw.

↧

Humiliator - Airsoft Gun

December 8, 2016, 7:33 am
$
0
0

This is my Humiliator !
It uses gas shotgun shells, like madbull or PPs shells.

You will need a short m3 nut and bolt for the trigger.

Want this Humiliator but don't own a printer ?
I have made a mold and cast several copies of the gun, if you want one send me a message, they are available for 20 euros +SH (from Belgium)

Like my stuff ? Follow me !
Love it ? Tip me :)

COMMERCIAL LICENSE AVAILABLE - CONTACT ME FOR MORE INFO

↧

The Snowflake Machine

November 27, 2015, 12:10 pm
$
0
0

The Snowflake Machine uses random numbers, mathematical algorithms, computer code, and SCIENCE to create well over a billion unique and beautiful snowflakes.

But all you have to do is click a button! Press "Open in Customizer" to get started. See the Snowflake Machine post on Hacktastic for instructions and design tips.

If you 3D print a snowflake from this model, please take a photo of your print and then click the "I Made One" button to upload your picture, so we can all see it!

Don't have a printer, or want something fancy?
Custom snowflake ornaments made with the Snowflake Machine are now available at the geekhaus Shapeways store:

image

UPDATE: UrbanAtWork made a great video of the Snowflake Machine in action in OpenSCAD: https://www.youtube.com/watch?v=coWbcSe4t7M&feature=youtu.be

↧
↧

Three Tier Playing Card Holder with Lattice Back

October 31, 2016, 12:43 pm
$
0
0

Do you love Shanghai Rum, but don't love holding piles of cards in your hand? This holder is for you! Three tiers let you organize your huge hand without dropping cards or getting muscle cramps. And it has a pretty lattice for everyone to enjoy.

↧

Gift Card Ribbon & Bow

December 13, 2015, 7:48 pm
$
0
0

Here is yet another means to spruce up that gift card. Here is a ribbon and bow that slides over your card to give it some flair.

↧

Toyota Third Member, Open differential scaled working model

February 15, 2016, 12:47 pm
$
0
0

Here is another 3D model to print. This is an open differential from a toyota pickup but functions the same way as almost all other open differentials found in other cars. Functions just like the real thing. I you have already printed all my other things then you can just hook up the drive shaft and watch it turn. Check out my other things to find the drive shafts and axle housings.

I have extra hardware for those that are interested in purchasing the bearings, screws, magnets, and 3mm shaft. Just email me.

https://youtu.be/4adoP7vi9J4

↧
Search

Power Star Tree Topper

December 15, 2013, 4:26 pm
↧
↧

Odile The Swan

August 26, 2014, 6:53 am
$
0
0

Odile is a character from the ballet "Swan Lake". She is the daughter of Von Rothbart, the evil sorcerer who turned the Princess Odette into a swan. Odette has a champion in Prince Siegfried who is in love with her, but Odile is sent by her father to seduce Seigfried, so he will forget his love for Odette. Odile is commonly known as the Black Swan, but of course, you can print her any colour that you like.
There is a lack of 3D printable swans and definitely those that can be printed without supports - so I made one. Full size she is about 8cm high but scales well. The small dark blue Odile was printed using a beta LittleRP resin printer (http://www.littlerp.com/) with MakerJuice (http://www.makerjuice.com/)
For scale, the little Odile is sitting on a US quarter and is next to a British 10 pence piece.
Odile was modeled in Blender.

↧

Tesla Cybertruck

November 22, 2019, 9:08 am
$
0
0

A 3D model of Tesla's new pickup "Cybertruck"

It is Modeled so you can install Red and White 5mm Led's under the
"Hood" (accessible from inside the car ) and in the trunk.

Supports should be set to "from build platform only" but you'll need to place custom supports for the headlight slot.

Please send pictures if you made one and give me tips on how to improve the model!
Feel free to doante: paypal.me/Wallerstedt1

Thanks!

11-23-19 : Added Seats, Steering wheel and Display

11-24-19: Fixed The front part of "Main", Added printable headlights and rearlights,
Added holes in cabin and in trunk for wiring, Added Trunk cover and top with
cutout for trunk cover. i recommend cutting out a thick paper piece that fits in
the slot for a nicer finish

11-26-19: Updated wheels, Fixed cybertruck Main bugs, Added STEP file

↧

Cowgirl

March 11, 2018, 6:55 am
↧

CR-10 / Ender 3 Direct Drivinator

April 28, 2019, 9:44 am
$
0
0

Long bowden tubes suck! This was even more apparent after installing a volcano clone heater block on my printer. You need precise control of the filament to keep blobbing in check.

Try this experiment- print out one of the many manual extruder knobs here on Thingiverse and install it on your extruder. Make sure the filament is fully inserted in your nozzle, and cool down your hot end. Once it is cool and the filament is fully fused into your hot end, turn the extruder knob back and forth and see how much the filament can move at the extruder with no movement at the hot end. The longer your bowden tube, the worse this is.

After looking through Thingiverse for a decent direct drive conversion for my CR-10 and not finding anything I liked, I decided to model my own. This fits on a stock CR-10 using the original style hot end (I am using the Micro Swiss all metal hot end).

My design goals were-
Cost as near to ZERO dollars as possible
Easy and clean installation
A strong and solid mount
Clear view of the hot end during printing

To those with concerns about adding mass to the X axis carriage- I say this: On an i3 style printer, It is irrelevant! Even with the big full size Nema 17 motor on the X carriage, it still weighs less than the y-axis- especially on a big printer like a CR-10. For comparison, my complete x-axis carriage assembly is 559g, a CR-10 glass plate alone is 1kg. Once you add in the heat bed, y carriage, etc, it's easily 2kg. And to make matters worse, the bigger your print, the more mass your y axis gets. Last I checked Cura 4.0 doesn't offer separate X and Y speed/acceleration/jerk setting, and definitely doesn't scale settings as the print increases in mass. If you are a speed junky, get a core-xy or delta printer.

↧
↧

Photonsters PTC Heater Unit

February 20, 2019, 6:42 pm
↧

Insulin and Tandem Cartridge Fridge Holder

May 15, 2019, 6:04 pm
$
0
0

This has not been tested yet. Tolerances may be too close. If you print let me know what issues you have if any. I'll update once I print it.

↧
Search

The Mandalorian Miniature

November 20, 2019, 11:41 am
$
0
0

Love the new Star Wars show "The Mandalorian", so I had to make a miniature of the protagonist! If you want early access to my figures, as well as some exclusive models, you can visit https://www.patreon.com/velrockart

↧

Articulated Lizard v2

March 20, 2019, 5:16 am
↧
↧

Throttle Lever Handle / Knob for Tecumseh Snowblower Engine (35440)

March 9, 2019, 5:48 pm
$
0
0

This part should fit the same as a Tecumseh 35440 knob for the throttle lever. It is similar in shape, and does fit perfectly (although tight) onto the metal arm.

↧

Old flatbed truck

August 15, 2016, 6:26 am
$
0
0

This is a model of an old flatbed truck. You can print it and lay it on the shelf or give it to a child to play with (better make it in bigger scale :) ).

To make it You need printed parts, glue and steel, carbon or even wood rod fi=2mm (about 12 cm) for axles and steering column.
The best instruction are pics above (numbers are stl files names).
Remember that You need 4 wheels (5) and 8x pice 27, 6x piece 28, 3x piece 29.

Traditionally SketchUp file included if You want to make some tuning or remix it.

Have fun...

↧

Freddie Mercury Sculpt

October 20, 2018, 3:11 pm
$
0
0

Freddie Mercury iconic pose during Wembley show. Made with sculptris

↧
Viewing all 135766 articles
Browse latest View live
Search